Home page › | Outlet | › Altri accessori › Audio accessori › Noosy BT Phone

Noosy BT Phone « Indietro

Marchio: Noosy

Codice SKU: BT PHONE

was 40,00 €

12,00 €

-70%

Dettagli del prodotto

Function and accessories:

1. iPhone 4/4S set-down area；2.Charging Interface；3.Handfree / Undisturbed Key；4. Volume 5.Bluetooth indicator light；6.Charging and Hands-free indicator light；7. Headphone；
8.Headphone microphones head；9.Hands-free speaker；10.Hands-free microphones head

Accessories:

BT phone,handle,profile,user manual

Specification

When using for the first time how to pair

1.When use the BT phone, please put iPhone4/4S in card slots firstly, and then inclined push down on(when you take iPhone4/4S off , please inclined from down to up on,please do not pick up iPhone 4/4S with vertical upward, and avoid to damage the contact port.)

2.When the iPhone 4/4S put in the BT phone, the BT phone will turn on automatically, and will also search the Bluetooth devices( red and blue light flash alternatively), and then enter into iPhone 4/4S,setting-->General->Bluetooth,turn on the bluetooth (figure 1.1)

3.Once searched the BT Phone,click the BT phone to connect(figure 1.2)

4.Once connected, there is a bluetooth sign on the top right,it means successful match(figure1.3). When it matching success,the blue indicator light will fast flash 2 times and hear"drop", and then you can exit iPhone 4 /4S setting interface.

5.When you not use the BT phone, pick up your iPhone 4/4S switch off the bluetooth automatically,the red light will flash 3 seconds and go out, the BT phone will be with dormant standby mode; when reuse the BT phone with iPhone 4/4s, 3 seconds later,the blue indicator light will flash, and 7 seconds later the BT phone will connect with the iPhone 4/4S automatically, you can directly to use without match again.

Notice: when the match mode is turning on, if can not finish the match, please repeat the above steps, match the BT phone and iPhone 4/4S again.

Basic instructions

1、Receive a call：when there is an incoming call, pick up handle of BT phone, and then you can directly send and receive the call; Or press the multi-functional key with hand free to send or receive when there is an incoming call
2、Make a call: pick up the handle and dial the called number, can be directly send and receive the call; Press the multi-functional key and dial called number, can be directly send and receive the call with hand free
3、End a call: when using the handle to send or receive the call , hang up directly, it will be ended the call when you hang up directly ; when using the hands-free to send and receive the calls , should press the multi-function keys to end the call
4、Volume up/down:Repeated press the volume up (+)or down(-) to adjust the volume while you are holding the phone
5、Undisturbed function: Press the handfree key for 5 seconds, the BT phone will set into the undisturbed mode, the blue indicator light will flash slowly, and the BT phone will not ring when there is a call; please press the handfree key for 5 seconds to restore the ring tone, and the blue indicator light will turn off ,the undisturbed function can be turned off
6、Charging interface: When the charging data wire is connected with the charging interface, the red indicator light will light and charge the built-in battery and iPhone4/4S directly,there are built-in charging protection circuit, once the built-in battery is fully charging, the red indicate light will go out, and also will have the instruction when your iPhone4/4S is fully charging

Using help

1、 The BT phone should be put in dry, ventilated place, do not put in sunlight, high temperature, strongmagnetic field places.
2、 When use the BT phone, please put iPhone4/4S in card slots firstly, and then inclined push down on;when you take iPhone4/4S off , please inclined from down to up on,please do not pick up iPhone 4/4Swith vertical upward, and avoid to damage the contact port.
3、 When the phone at low power, it will alarm once per 30 seconds , while the red light is flashing, pleasecharge in time, so as not to affect the call.
4、 Put the BT Phone on the flat surface.
5、 Do not use the Thinner,Toluene and other corrosive substances to clean the BT phone.

Noosy BT Phone « Indietro

Warning

Dettagli del prodotto